This is an old revision of the document!


2013 Honda Accord EX-L V6

Work Log

5/7/13

Purchased from Bell Honda in Phoenix, Arizona.

5/14/13

Disabled the ANC module by removing the two pieces of molding between the seats. Removed the console pocket via the two visible screws. Removed the Bluetooth module by removing the two 7mm bolts and disconnecting. ANC module was then visible and removed plug from back side. Other websites have also reported this being much easier to access by removing the plastic wall at the left side of the passenger's foot compartment.

6/21/13

Took the Accord into the dealership because we discovered that the passenger's side electronic seat controls were not working. Upon inspection they found they had been disconnected during alarm or remote start installation. Plugged it back in and the power seats were verified to work.

project/2013_honda_accord.1371857755.txt.gz · Last modified: 2013/06/21 23:35 by smark
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0